Microphone Accessories

Showing 1–16 of 55 results

grid-view list-view
  • 4006A Acoustic Pressure Equalizer, 30 mm Ball

    4,710 Excl. GST (5,558 Inc. GST @ 18%)
    The Acoustic Pressure Equalizer Ball for d:dicate™ 4006A Omnidirectional Microphone is a sphere shaped Acoustic Pressure Equalizer. It comes in three sizes and can be used for the microphone or the stereo kit.

    The APE30RS, a Ø30 mm sphere, gives a mild modification of your microphone’s on-axis and off-axis frequency responses and a slight change in the direction-to-reverberation ratio. This will give your recordings greater presence, nearness and clarity on-axis (especially around 4 kHz).

    SKU: APE30RSAdd to cart
  • 4071 Miniature Mesh

    1,570 Excl. GST (1,853 Inc. GST @ 18%)

    Miniature Mesh for use with d:screet™ 4071 Omnidirectional Microphone. Reduces slight wind noise or pop noise from a speaker’s voice or any other turbulence that can cause the diaphragm to disperse.
    The Miniature Mesh will give a high frequency boost that is strongest on axis. For use on a speaker’s chest, it is recommended to mount the microphone pointing upwards in order to avoid boosting the reflections.

    SKU: DUA0572Add to cart
  • BOOM TILT FOR STEREO BOOM

    4,740 Excl. GST (5,593 Inc. GST @ 18%)

    Boom tilt for use with our d:dicate™ line of Stereo Kits.

    SKU: BT1500Add to cart
  • Foam windscreen for Active Cable Mics

    1,780 Excl. GST (2,100 Inc. GST @ 18%)
    This windscreen is designed for use with microphones with a 24 mm (1 in) cartridge.
    SKU: DUA0041Add to cart
  • CLOSE-MIKING GRID, TRAPEZOID, SILVER

    7,310 Excl. GST (8,626 Inc. GST @ 18%)
    A microphone protection grid suited for close-miking applications. Gives a soft reproduction of the high frequencies.

    The grid works with the d:dicate™ 4003 Omnidirectional Microphone, 130 V and d:dicate™ 4006 Omnidirectional Microphone, but can also be ordered separately.

    SKU: DD0254Add to cart
  • FOAM WINDSCREEN FOR D:VOTE™ 4099, 5pcs.

    3,130 Excl. GST (3,693 Inc. GST @ 18%)
    Foam Windscreens for d:vote™ 4099 Instrument Microphones.

     

    SKU: DUA4099Add to cart
  • ID RINGS AND MAKEUP COVER FOR D:FINE™ SLIM

    950 Excl. GST (1,121 Inc. GST @ 18%)

    Color coded identification rings and make-up cover for d:fine™ Slim Headset Microphone.

    SKU: DUA0585Add to cart
  • Foam Windscreen, Ø19, Length 72 mm (2.8 in)

    2,410 Excl. GST (2,844 Inc. GST @ 18%)
    The windscreen is designed for the d:dicate™ 2011C Twin Diaphragm Cardioid Microphone, Compact.

    It is well suited for outdoor applications and for speech and singing at close distances.

    SKU: DUA0028Add to cart
  • Nose Cone

    8,060 Excl. GST (9,511 Inc. GST @ 18%)

    The Nose Cone gives your microphone a perfect omnidirectional response across the whole audio frequency range. It counteracts the directional characteristics that omnidirectional microphones exhibit at higher frequencies. It also guarantees an even tonal balance of sound arriving at all angles of incidence but with a high-frequency boost on-axis.

    SKU: UA0777Add to cart
  • Vocal Mic Foam Windscreen

    2,930 Excl. GST (3,457 Inc. GST @ 18%)
    Foam Windscreen for d:facto™ Vocal Microphone.

     

    SKU: DUA0703Add to cart
  • 4017B Rycote Windshield Kit

    51,270 Excl. GST (60,499 Inc. GST @ 18%)
    DPA Microphones has joined forces with Rycote® to develop a Windshield Kit Solution for d:dicate™ 4017B Shotgun Microphone.

    The strong suspension and windshield solution has been designed specifically to take the mic’s small size and light weight into consideration. Special soft lyres are selected to optimize vibration isolation.

    No Cost EMI starts at ₹5,042/month
    SKU: RWK4017BAdd to cart
  • 4090/4091 Foam Windscreen

    1,050 Excl. GST (1,239 Inc. GST @ 18%)

    Foam Windscreens for d:screet™ 4090/4091 Miniature Microphones.
    Well suited for outdoor applications and for speech and singing at close distances.

    SKU: DUA0573Add to cart
  • ACCESSORY KIT FOR FILM APPLICATIONS WITH d:screet™ 4071

    10,910 Excl. GST (12,874 Inc. GST @ 18%)

    This kit is made for film or TV production use. It contains accessories to use when you must conceal the microphone so it is invisible to the camera.The kit is delivered in a sturdy case with a transparent lid. Inside there is room for a microphone from the d:screet™ series and one or more adapters. The kit contains various microphone concealment fixtures.

    SKU: DAK4071-FAdd to cart
  • POP SCREEN FOR D:FINE™ 88 AND 4088,5pcs.

    10,780

    Pop screens for d:fine™ 4088/88 Headset Microphones.

    SKU: DUA057PSSelect options
  • FOAM WINDSCREEN FOR D:SCREET™ SC4098

    3,700

    Foam Windscreens for d:screet™ SC4098 Podium Microphones.
    Sold as a set of five pcs. Available in black and white.

    SKU: DUA0580Select options
  • FREE-FIELD GRID FOR D:DICATE™ 4006

    7,310 Excl. GST (8,626 Inc. GST @ 18%)

    A microphone protection grid suited to making all types of near-field recordings.

    SKU: DD0251Add to cart